4 Port Manifold - Run 3 Airbrushes from 1 supply.
This device will allow connecting up to 3 airbrushes to the same compressor. Each ports has an individual shutoff so all ports need not be used.

*Special Order Only

Use this 1/8" BSP connection Male-Male to connect multiple hoses to create a longer extension.

1/4" BSP Male to 1/8" BSP Male connector.
For connecting an Aztek Airbrush to a Compressor AS18-2

Male adaptor BSP 3/8" & 1/4"

Concentrated airbrush cleaner is specifically formulated for acrylic water based colours.
Use full strength to soak Aztek nozzles and colour cups over night (do NOT soak airbrush body). Dilute 50% with water to use as a flush cleaner betwee...

Airbrush Cleaner 200ml ArtClean 93 920 Liquid cleaning concentrate - stand-out suitable for cleaning the spray-gun, brush and work surfaces. - Remove dried acrylic paint - grease remover. ArtClean seal is friendly, skin friendly, antibacter...

Straight 3m (10ft) air hose 1/8" x1/8".

Use when large amounts of media are required. Insert securely - bottle should hang down without falling off. Remove with a gentle rocking motion while holding top of spout. Sypthon cap has a 33mm diameter.

Adapts Aztek hose from a compressor thread, to a Airbrush Propellant thread size.

600ml can of compressed air for airbrushing.

It can co-operate with all kinds of airbrushes, spray gun, craftwork, cosmetics, tanning, hobbies/models, fingernail painting, and general airbrushing.

1. Quiet, low noise.
2. Oil-less.
3. High pressure (2.8 Min. - 4 maximum bar)
4. Shut-o...

Baby air compressor AS-16 is easy to operate with a built in airbrush holder, at 1/8 horsepower this unit delivers sufficient Air Volume (CFM) and Air Pressure (PSI) to operate most airbrushes. Very portable light-weight and Compact with a ...

^Please allow 10-14days for delivery.

Automatic shut-off, extremely quiet. Max
pressure 6 bar, weight 15kg.